- Advertisement -
TechnologyHow do I reset my Maytag Commercial Technology Top load washer?

How do I reset my Maytag Commercial Technology Top load washer?

Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.

How do you start a Maytag front load washer?

Touch and hold for up to 3 seconds until the light above Start/ Pause comes on to start a cycle, or touch once while a cycle is in process to pause it. You should see a 3-2-1 countdown while holding the Start button. If you see “Err” instead, make sure the door is closed before starting a cycle.

What does the extra power button do on Maytag washer?

Extra Power Button: Boosts drying power on any cycle by extending time, heat and tumbling. One push helps prevent underdrying by getting thick fabrics, pockets and seams drier the first time².

What does number of wash cycles mean?

On some machines, the numbers are replaced with super heavy, heavy, normal and light cycle choices. The heavier the load, the longer the load takes to wash. The longer the wash cycle, the better for getting heavily soiled garments clean.

See also  What is the importance of fire technology?

How do you unlock a Maytag commercial washer?

Washer door unlock fix: Cancel the wash cycle, wait for it to drain the water and the door should unlock, OR pull the green string near the detergent area, OR pull the lever on the bottom of the door switch, OR unplug the washer for 5 minutes to reset. These 4 things should unlock your washers door.

Is there a reset button on Maytag washing machines?

Hold down the Delicates and Knits button for five seconds. The washer’s LED display should now flash and start to blink, which means the error codes have been resolved and the washer has reset.

Why won’t my Maytag washer drain and spin?

A top load Maytag washer not draining may have a defective lid switch assembly. On top-loading washers, draining and spinning will only occur if the lid is properly closed and activates the switch. Try depressing the lid switch with your finger to see if the machine drains and spins.

What is Maytag commercial technology?

Maytag® Commercial Technology features high-performance parts, including a 2X Life tested direct drive system and commercial springs. Sanitize cycle with Oxi removes 99.9% of household bacteria. American Pride – from Clyde, Ohio to you, this washer is designed, engineered and assembled in the USA.

What is the difference between agitator and impeller?

Traditional agitators are tall spindles, vaned or finned, in the center of the wash basket that twist (or agitate) back and forth, rubbing against clothes to help break down loose soils. Impellers, on the other hand, are low-profile cones or discs that spin/rotate to rub clothes against each other to get them clean.

See also  Is Tilval Store Legit (Update 2022) Read Detailed Reviews!

How much power does a Maytag washing machine use?

A washing machine will use 400 to 1300 watts, with modern Energy Star rated models using about 500 watts. Click calculate to find the energy consumption of a clothes washer using 500 Watts for 0.25 hours a day @ $0.10 per kWh. This is the same as washing twice a week for 52.5 minutes each time.

What setting to wash towels?

Generally, warm or hot water is recommended for washing towels. Use a cycle specifically for towels or a normal/regular cycle. A sanitizing cycle can also be used, but may not be recommended for every wash, depending on the towel fabric.

What is the best cycle to wash clothes on?

Generally speaking, cold wash cycles are best for delicates, colored, and normally soiled clothing; warm water is best for more soiled clothing and whites; and hot water is best for very soiled clothing or for loads, like underwear and towels, where you want to remove germs and allergens.

What comes first spin or rinse?

Rinse: The dirty, soapy water is drained, then the washing machine is refilled and your clothes are “rewashed” in clean water. Spin: All the water is drained completely, then your clothes are spun very fast and excess water is removed thanks to centrifugal force.

How do I turn off the LOC on my Maytag washer?

If you do not see the 3-2-1 countdown and are unable to de-activate Control Lock, try pressing the POWER button first, then touch and hold 3 seconds to de-activate control lock. If this does not work, try unplugging the machine or turning off the breaker for 1 minute, then power the machine back on and try again.

What does E01 and F09 mean on a Maytag washer?

Accepted Answer. Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

See also  What new technology is Jeff Bezos and Elon Musk investing?

Why is my Maytag washer stuck on sensing?

If your Maytag washer’s sensing light is stuck and will not move to the appropriate cycles, this is usually caused by a stuck or keypad. The keypad can occasionally become jammed or, if you have recently replaced a part on the washer, you may have forgotten to recycle the codes, which can lead to a stuck sensor light.

Why won’t my washer drain and spin?

If your washer won’t drain or spin, the water level control may be faulty. Open the machine’s control panel and look for a plastic tube attached to the water level valve. If it’s clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.

Why is my washing machine not finishing the cycle?

One common issue that can cause a washing machine’s cycle to stop is the heater to stop working properly. To test this set your washer on a cycle and monitor it every so often, if the cycle stops within the first 30 minutes then the water likely isn’t getting sufficiently heated.

How long does Maytag Commercial washer take?

A: The washer takes anywhere from 45 minutes to an hour to complete a cycle using the Normal Wash Cycle. Some other factors to consider is how long the machine takes to fill to do the laundry in the Normal Wash cycle and how much water pressure you have coming to the machine.

- Advertisement -

Latest article

More article

You cannot copy content of this page